Prepare Power Trowel / Ride On Trowel with G200, Sprinkle water and start the grinding process, Two passes in each directions. Check the floor surface and the Slurry which is generated. If slurry is thick, add more water. Remove the slurry completely then clean with water before start next step of grinding. Use Only Scrubber Dryer for clean the concrete Surface for better results. Make sure the Concrete floor surface completely clean without any dirt, apply densifier based on Manufacturers recommended dosage. Allow the chemical to penetrate without any disturbance.

Prepare Power Trowel / Ride On Trowel with G100, Sprinkle water and start the grinding process, Two passes in each directions. Check the floor surface and the Slurry which is generated. If slurry is thick, add more water. Remove the slurry completely then clean with water before start next step of grinding. Use Only Scrubber Dryer for clean the concrete Surface for better results. Prepare Power Trowel / Ride On Trowel with G200. Make sure the floor surface completely clean then apply water and start the next grinding step. Do the same Cleaning process again before starting next process. Start Polishing with G400 & G800, Two passes in each direction then clean.

Prepare Power Trowel / Ride On Trowel with G100, Sprinkle water and start the grinding process, Two passes in each directions. Clean & check the floor surface then grind with G200.Make sure the Concrete floor surface completely clean without any dirt, apply densifier based on Manufacturers recommended dosage. Allow the chemical to penetrate without any disturbance.Start Polishing with G400, G800, G1500 then Clean the floor surface apply Sealer coat and start final polishing with G3000.